Відео

Awesome !

Awesome.work , im restoring a 89 k5 right now a lot of but some headaches lol

I've been enjoying your videos on the Ranger. Have one similar to yours. Having trouble getting used to the suicide doors. Why you suppose they build them that way?

Got a 2003 with pretty much the same setup but it took getting almost to the end to figure out how you got the gas tank out in the first place but the hint was when you said "...oh yeah, I gotta put back in the DRIVESHAFT!" For the 1000's of frustrated S10 owner with a 2002-2004 YOU HAVE TO TAKE THE DRIVESHAFT OUT (or in my case drop the back half) IN ORDER TO REMOVE THE TANK OR EVEN LOWER IT. Absolutely ZERO clearance on EITHER side to shift the tank w/the lower bracket attached and get it out WITHOUT REMOVING THE DRIVESHAFT. Pretty important detail that's frustrated the crap outta a LOT of us - even the service manual doesn't mention that (it just assumes). BUT when you drop the shaft, it's a pretty straightforward job. The rear strap on the drivers side is angled and HIDDEN behind the tank so you MUST completely REMOVE the entire tank IF you have to replace the rear strap. Have watched a LOT of your S10 videos for yrs. YOU deserve a STANDING OVATION SIR! Lessons learned - Keep it simple. Right to the point and use SIMPLE LOGIC. THANK YOU!!!

Do you have the top radiator hose numbers lmc could not sell me the right one for a friends 71 k10 so any factory numbers would help.

Thanks for the video. Clever solutions! Is that the stock Polaris Lock and Ride rack you are attaching everything to?

Sounds like a civic with a fart can

How does the 04 handle the plow mossman

Upper balljoint goes first, even if they were both put in same time..

Any chance, do you have the parts list / Part number for everything you used on the full rebuild?

How did they hold up?

I have a duramax, but god damn those sending units look like a POS

Why didnt you just measure zirk to zirk on the old one

Was it cheaper to do the conversion kit versus buying another 350 turbo transmission? What was the price difference at that time?

I just got a 69 mm TB from mace engineering with ecu remap and bcm setup for 4L60E transmission being firmer! Now I have to port match my new TB. Excellent throttle response and better fuel economy!

2024... Fingers crossed. Abs was locking, now after cleaning grounds lights went away, now hopingbit doesn't lock again!

How do the magnets hold while driving on the highway ? At 75 mph and up?

I will tell you I have a 01 Sonoma sls extended cab long bed step side witch kinda hard to find but the factory tire one year option 235/55/r16 it is hard as hell to find that size so i went up to 235/75/r16 and had to take the bottom bolt out the finder well modified the finder well and lifted it 2 inches just so I wouldn’t scrub and hit the top of the finder well when hitting a bump I put bigger springs and shocks in the front and added a leaf spring and bigger shocks in the rear but I run Firestone destination at/2 my papa gave me the truck he said something to remember him by but I love that little truck low miles wish it was 4wd like my 98 Silverado k3500 but its a little going to town truck I can’t complain it was free but what I did to make not scrub

That's bull crap. That is a manufacturer flaw

It's idling to high

She a beauty didn't show the gear shift be safe God Bless you and your family 💯♥️✌️🙏🥂🤟

its bad enough if you're gonna hack your own stuff up, please don't advise others if you have no clue what you are doing

Thank you God Bless

👍👍I put 4 new tires on my ATV .This method works so well. It is easy and quick. I will be sharing this video.

Let me save someone else some time, dont buy rotors for a gm hd truck 01-07 i believe from advance auto!. The rotors are not deep enough and dont seat on the hub all the way. Ive never seen anything like it in all my years of working on vehicles. They snap under weight. Someone else in the advance auto reviews of the rotor had the same issue with his hd gm truck. Your welcome. Use auto zone next time. Point taken. What a mess this all was. I will never use advance again. Ever.

Do you have the link where I can find the spacer you ordered for your 70 Chevy truck? I’m looking for the exact same spacers for my rear wheels.

🔥🙌

I can’t believe you didn’t fix the gear oil leak . That leak usually indicates a failing wheel bearing and metal on metal brakes indicate poor maintenance or heavy towing or both . Good luck on this half A$$ fix .

I liked the concept but it seems to slow you down too much.

Great video, it is going to help me a lot.

Heat is yo friend

Looks like fun. Sorry to hear about your mom.

How you guys handling oh the rain this year.

Things that might help with a project like this: CT90 Fork Boots: amzn.to/4aOKuiJ Carb Kit: amzn.to/4dpp0uD Spark Plug: amzn.to/44q6JZN This video contains affiliate links, which means that if you click on one of the product links and buy, I'll receive a small commission.

I’m wanting to do the lift spindles on the front of my 2000 Chevy blazer. Do you think if I just do that and don’t mess with the back it will look alright? I know the back sits higher now than the front but I want the front to sit higher than the back to clear the 31” tires?!

I have a 2000 Chevy blazer and want to lift the front to help clear 31’s, If I do the same thing and don’t touch the back I know it will sit higher in the front which is what I want but not look squatted. If you would have not touched the back you think it would still of looked alright?

Mine was leaking at the crimp where line is pressed to block. I cut the lines about 6” towards engine and removed leaking block. Harvested a block from a new line set with lines cut as needed and used 1/2” compression couplers to connect. Some fiddling but 1 hour job. Rest of line set was in excellent condition. No leaks.

I'm about to tackle this on my 70 k-10 too. So thanks for the video; very helpful! Love your truck and the way it sits.... One quick question: What suspension lift are you using? Really looks perfect! Thanks!

First time to hear about DieHard brand

Love that power

What was the antibiotics used? Doxy or Moxy?

Beautiful 😍😍😍😍

ua-cam.com/users/shortsb3rFO6gIG8E?si=c5uNT5X0-F5y0F-n added these to our doors and love them

I refilled my 05 yukon after 52 ounces leaked out. It holds 64 ounces total. I ran out of auto trak fluid after 26 ounces and made a mix of 50/50 merc3 atf to 10w30 motor oil for the rest. So far so good.

Dude you should not be anywhere near an engine.

You’re stupid

Actually very little here to help with installation didnt actuall show any of the process.

I have a KM130 and the trimmer and tiller attachment for garden beds. They advertise it as 1.9 hp, but that’s really deceiving. This thing would destroy a 1.9 hp 2 stroke. I’d like for them to advertise torque instead of horsepower, because that’s the number that really matters.

When I was 4-5 years old I would watch your ztrak videos all the time thank you so much for giving me great entertainment as a kid 😄